320D injector storage standards refer to a series of specifications and requirements that need to be followed when storing and managing fuel injectors. As a key component of engine combustion control, the quality and performance of injectors directly affect the combustion efficiency and emission performance of the engine. Thus, it is crucial to follow storage guidelines for fuel injectors in order to prevent damage to them while in storage and to guarantee that their quality and performance meet specifications, which in turn ensures the engine runs normally.
The warehouse and cargo yard where the fuel injector is stored should be kept clean and dry, and away from the factory buildings that generate harmful gases and dust; do not mix with acid, alkali, salt and other substances; the storage place should have a good drainage system; the cargo yard should be flattened with gravel or furnace ash etc. to enhance the water permeability of the surface layer to keep the reservoir area dry.
Strict requirements of warehousing
Strict inspections should be carried out when the fuel injectors are put into storage, the surface cleaning work should be done well to remove water traces, oil stains, ash and other dirt, remove the rust and do anti-rust treatment in time. Packaged injectors must be protected from damage.
Keep the warehouse dry and preventing moisture
The relative humidity is usually below 70% for the fuel injectors placed in the room, and the corrosion of the fuel injectors is significantly reduced.
Injectors must be stored in the warehouse, and they are forbidden to store in the same warehouse with commodities with high water content.
Stack Properly
After the injector is exposed to rain, the corrosion rate will increase significantly. The purpose of sealing is to isolate the injector from rainwater and humid air, so the warehouse window should be checked in time to avoid rainwater entering the warehouse
If the fuel injector package is damaged, it should be repaired or replaced; when the package is damp, the packaging material should be dried; if the original anti-corrosion and oil applied at the factory is found to be damaged or dried up, it should be cleaned and re-applied oil in time.
It is forbidden to leave the injector exposed in the air for a long time.
It is forbidden to store acid, alkali, saltand other substances together with the injector.
The unpacked fuel injector must be rust-proof during secondary storage.
—A: A: High quality products with reasonable price, quick shipping. B. Independent quality testing system to guarantee the quality. C: Good technical training and technical support. D: Professional international business communication and support. E: Professional options for international transport. F: Reliable brands supplier.
Q2:Are you a manufacture or a trading company?
—A:Some of products are produced by our factory, such as injector nozzles, remanufacture injectors and fuel pump. And some of spare parts, we are distributing different brands of original diesel injectors and fuel pumps and their spare parts.
Q3:How long will the goods be delivered?
—A:70% of our popular selling products are in stock, which make sure quickly delivery. Normally, orders can be send out within 5 working days.
Q4: What is your after sales service policy?
—A: Customer satisfaction is the most important thing for us. SHUMATT all products are tested before shipping. If customer meet quality problem, we will unconditionally provide replacement or refund.
Q5:Distributor support policy?
—A: We recruit distributors all over the world and provide them with VIP price , local market promotional assistance, professional product cataloger and other promotional materials, local exhibition assistance, etc.
